空气源热泵安装

News classification

Product

Contact

Name: Tangshan state energy new energy development Co., Ltd.
National unified business customer service hotline: 400-078-1588
Switchboard: 0315-3296070
Fax: 0315-2926166
Address: 150 meters north of Binhai Road, Tangshan port development area.
Mailbox: tsgnxny@163.com
Web site: www.tsgnxny.com

How do you install the air source heat pump? Look at this!

Your current position: Home page >> News >> Common problem

How do you install the air source heat pump? Look at this!

Date of release:2018-06-26 Author: Click:

        It is also the most obvious advantage of air source heat pump heating compared with other heating methods. In terms of heating and cooling demand, the Yangtze River Basin is a very good marketing breakthrough. And, compared to the small profits in the hot water area, the hot and cold projects are more profitable, so now more and more air distributors are put into the two market.
However, the design and installation of air-source heat pump is more demanding, slight mistakes will bring problems in the later period of operation. To this end, we consult the engineer who has a lot of experience in the design and installation of the system, and share his practical experience with you for your study.

1. Try not to use a radiator at the end

At the end of the two joint supply system, the end of the system is generally used in the form of ground heating and fan coil. Some users are restricted by various conditions, and also have the form of heating or landing. However, according to experience, do not make radiator as far as possible, otherwise the running cost will be higher than that of floor heating.
Of course, if the user's home floor has been paved well, I suggest that we can make the landing plate better than the radiator. Because the radiator first takes up area, second heat efficiency is also relatively low, if not to use the radiator, in accordance with the ratio of the wall furnace and radiator, the number of heat is multiplied by 2, and the use of copper aluminum composite radiator or special low-temperature radiator.

2. Soft water is added to the system as much as possible
Many people may not pay much attention to the water quality when installing the two heating system. Because the water quality varies from place to place, the content of calcium and magnesium ions in some water is relatively low, which may not be a problem in the system. In some areas, the calcium and magnesium ions in water are very high, and are added to the system for up to two years at most. It is possible to cause plugging in pipes, Y filters, pumps, units and so on, which seriously affect the use. For example, we encountered in the installation process, one of the users, his home water hardness value reached four hundred and fifty.
In addition, in the area with low temperature in winter, a certain amount of antifreeze or alcohol is added, and the antifreeze is generally described. Alcohol is recommended for 99 degrees of industrial alcohol, and the amount of alcohol is adjusted according to the actual situation and the circulation of water in the system. For example, if the circulating water in the system is 100L and a kilogram of alcohol is added, the alcohol content of the water is basically 1%, then the freezing temperature of the water is - 1%. Some of the projects I've done earlier are alcohol, and my experience is that the circulation of water in the system is 100L, and I add five kilograms of alcohol, because we are here at a minimum of -5, and the water content in the system is 5%, so we can resist the environment at -5 degrees (not frozen). In many areas, the temperature is low in winter. When the users do not use the ground heating or the long time blackout at night, it is easy to cause the freezing of the pipes or units, so a certain amount of antifreeze or alcohol needs to be added.
3. A two - way valve must be added to the fan coil
Because there is no two-way ball valve, some rooms when not in use will also feel a cold air outlet, while the system will be slightly larger electricity consumption. According to this experience, a two - way ball valve is added to the later stage of the project, which is installed at the outlet of the fan coil, and in the whole system, if there are five or six wind plates, at least one of the blower will have a three copper ball valve. Why do we need a wind dish and a three way ball valve in the system? This is the case. If the two - way ball valve is used, when the user uses less wind plate, only one or two, the resistance of the water in the system is very large, which can easily cause the vibration of the pipe, and then produce the noise.

空气源热泵

The address of this article:http://en.tsgnxny.com/news/418.html

Key word:空气源热泵安装,空气源热泵厂家,空气源热泵电话

Recently browse:

Address: 150 meters north of Binhai Road, Tangshan port development area.
National unified business customer service hotline: 400-078-1588
Switchphone: 0315-3296070
Fax: 0315-2926166
Mailbox: tsgnxny@163.com
Web site: www.tsgnxny.com

Please leave a message for us
Please input the message here, and we will contact you as soon as possible.
Full name
Contacts
Telephone
Seat / mobile phone number
mailbox
mailbox
address
address